Need some help here quick.

[91zc]

The jackass that adjusted my valves last time also torqued my valve cover down too tight and stripped the two studs in the back. Anyone have any idea how to get them out and replace them???

------------------
1991 Civic 4dr
ZC
Zdyne Ecu
Si tranny
Thermal R&D exhaust
Iceman
Chikara header
Weapon R Circuit Pro
KYB AGX's
Powerslot Rotors
AEM/Nissin Pads
Going B16 soon

[CWBETB]

can you double up the nuts? Then try to get it off. "Sorry bad explanation" it was suggested to me when my oil pan nut was stripped

------------------
90 Civic Turbo ZC

Home Page:
http://www.geocities.com/cwbetb

4th Gen Page:
http://www.geocities.com/hondacivic4g

Car Club:
http://www.teamkayo.com

[91zc]

Hmmm....I am really pissed. I went to do the valves again because when the guy adjusted them they were still loud and I thought he f'ed up while adjusting them. I got all the rest off but the back two were just spinning in place. I am going to try to get them off tonight.

------------------
1991 Civic 4dr
ZC
Zdyne Ecu
Si tranny
Thermal R&D exhaust
Iceman
Chikara header
Weapon R Circuit Pro
KYB AGX's
Powerslot Rotors
AEM/Nissin Pads
Going B16 soon

[91zc]

Come on guys I really need some ideas since I am getting ready to pull th motor and I don't want to sell it to shawn with the valve cover studs buggered up.

------------------
1991 Civic 4dr
ZC
Zdyne Ecu
Si tranny
Thermal R&D exhaust
Iceman
Chikara header
Weapon R Circuit Pro
KYB AGX's
Powerslot Rotors
AEM/Nissin Pads
Going B16 soon

[CWBETB]

You could get a welder to weld a rod to the bolts, then yank them off. Or use a dremel and shave the nuts till they fall off

------------------
90 Civic Turbo ZC

Home Page:
http://www.geocities.com/cwbetb

4th Gen Page:
http://www.geocities.com/hondacivic4g

Car Club:
http://www.teamkayo.com